10 Gallon Electric Home Brewing System - Touchscreen PRO - 240v - BIAB

Current Price: Current Price: $1,999.00
Product Subtotal: $1,999.00
Original Price:

Pre-Sale. Will ship in October 2026

Fast shipping

Discreet packaging

Product Details

The Best Electric Brewing System, Now With a Brain

This single vessel, turn-key, all grain brewing system is a setup like you've never seen, and

The Best Electric Brewing System, Now With a Brain

This single vessel, turn-key, all grain brewing system is a setup like you've never seen, and it now runs our own touchscreen brewing controller. 5500 watts of blazing fast heat up, and a brewing computer that runs the day for you.

What Is Brew in a Bag?

Typical brewing systems require 2 or even 3 different vessels (pots, pans, kettles, etc...). Ours only uses 1. That's because we've integrated stainless steel grain and hop baskets into the design, which can be removed after use. This allows mashing, boiling, hop additions, etc. to be done in the same kettle. Once you're done mashing, simply lift the basket, install basket support clips, and allow the grain to drain into the kettle.

Our New Touchscreen Brewing Controller

At the heart of this system is a brewing computer we designed and built ourselves, not a thermostat with a temperature readout. You build the recipe once, send it to the kettle, and the controller runs the whole day: it heats the strike water on a schedule, holds every mash step, detects a real boil, calls out every hop addition by name, times the whirlpool, and hands you a brew report at the end.

Your Water Doesn’t Boil at 212°F

There is a real barometric pressure sensor on the board. The controller works out the boiling point from live air pressure and shows your elevation and "BOILS AT" right on the screen. At 5,000 feet your water boils around 202°F, and the controller knows that. It declares boil at your actual boiling point instead of waiting for a hard coded 212°F that will never arrive. That same reading is the reference when you calibrate your probe.

Your Recipes, On the Kettle in Seconds

Build a recipe in our own Beer Builder, press send, and it's on the kettle with the mash steps and the hops named. Already use Brewfather? Enter your API key once and your recipes show up in the same list. BeerSmith, Brewer's Friend or anything else that exports BeerXML? Drop the file on the pairing page and it lands on the kettle too.

It Tunes Itself To Your Kettle

One button auto-tune heats the kettle, learns how it responds, and saves the result, about an hour on 240v and mostly hands off. Two point probe calibration, ice water and a rolling boil, gets your temperatures honest. And once a true boil is detected the controller eases the power back so you hold a rolling boil instead of climbing toward a boilover.

Set It and Walk Away

Schedule your start and the controller works backwards to fire the element at the right moment, so the water is hot when you want it. On screen you get a live status word, the measured heat rate and an ETA to target. And if the power drops mid brew, it offers to pick the day back up exactly where it left off, asking first whether the pump should come back on.

It Gets Better Every Month

Signed over the air updates come from our own servers. The controller you buy today is not the controller you'll own in six months, and every update reaches every unit already sold, free.

The Rest of What It Does

  • Full guided brew day: mash, mash out, boil, hop additions, whirlpool, chill, done.
  • Up to 8 mash steps, each with its own temperature, time and optional name.
  • Grain in gate. The kettle heats to strike, holds, and waits for you to say the grain is in before the clock starts.
  • Up to 12 additions per recipe, each named, called out at the right minute by name and amount.
  • Stir all you like. Once a step is at temperature the clock runs to zero.
  • Mid brew editing: add a step, retime the running one, change a future temperature, add or delete a hop. Anything already fired is locked so the day can't be corrupted.
  • 10 recipes stored on the unit, editable right on the screen, and a water and salts sheet on every recipe card.
  • Brew report at the end with run time, peak temperature, energy used in kWh, and a QR code that takes you straight to reordering the kit.
  • Manual mode turns it into a straight temperature controller with a stopwatch, for sous vide, cheese, canning or distilling.
  • Separate tuning and power limits for 120v and 240v, so the controller is right for the element in front of it.
  • Six real brewery sounds, or a classic ding, or silence. Your choice, with its own volume.
  • 800x480 colour touchscreen with brightness control and a 180° flip for wall mounting.
  • Probe loss kills the heat, with a three second debounce so a bumped connector can't dump your boil.
  • No app. No subscription. No account needed to brew. Turn the Wi-Fi off and it's still a complete brewing computer.

The System Includes

  • A complete, semi-automated, 5500w electric home brewery.
  • 10.5 gallon, 304 stainless steel brewing (mash and boil) kettle.
  • 304 Stainless steel, removable, self draining grain basket.
  • 30 amp Clawhammer touchscreen brewing controller. (always use GFCI protection)
  • 5500 watt ultra low watt density heating element (about 23 amps on 240v).
  • High volume, high temp, food grade, heavy duty, pump.
  • Removable temperature probe communication wire.
  • High efficiency flat plate heat exchanger (20 plate wort chiller).
  • 3 grain basket drain clips.
  • 304 Stainless steel, removable hop basket.
  • Food grade, high temperature, thick walled silicone hoses.
  • Quick release sanitary hose fittings.
  • All required tri-clamps, valves, hoses, and fittings.
  • 30 amp control panel power cord (8 feet long with 4 prong washer/dryer plug).
  • Heating element power cord (twist lock, 10 feet long).

Product Details

Dimensions

14.5" diameter, 17" tall without lid, 19" tall with lid.

Frequently Asked Questions

Do I need Wi-Fi or an account to use it?

No. The controller is fully functional offline. Wi-Fi gets you recipe sync and over the air updates, and you opt in feature by feature. There's no app to install and nothing to subscribe to.

How long does auto-tune take?

About an hour on 240v, and it's mostly hands off. You run it once. The result is saved for your kettle and your voltage.

What's the difference between this and the digital controller version?

The kettle, element, pump, chiller and all the stainless are identical. This version replaces our PID digital controller with the touchscreen brewing computer described above: recipe import, guided brew days, the barometer, scheduled start, power loss resume and over the air updates.