Fast & FREE Shipping!

This blog provides information for educational purposes only. Read our complete summary for more info.

September 8, 2020
Last updated

Three Eyed Ale Homebrew Recipe

Owner of Clawhammer Supply

Three Eyed Ale Homebrew RecipeBell’s Two Hearted Ale is a staple when it comes to IPAs. Thanks to another one of our fans on Instagram, you can now brew a version of this classic IPA at home. Follow along with this recipe and our full brew day video to make a rock-solid IPA that’s tailored for a Clawhammer brewing system.

Full Brew Day Video

We brewed this beer using the Clawhammer Supply 10 Gallon 120 Volt Brewing System. Watch us use it in the video below.


We started this brew day with 7.2 gallons (27.3 liters) of Asheville City Water. We did not adjust water chemistry for this beer.

starting water volume


The grain bill for this recipe is as follows:

  • 2 Row - 11 pounds (5 kg)
  • Vienna Malt - 2 pounds (1 kg)
  • Crystal 150 - 8 ounces (226.7 grams)

In order to maximize efficiency on our system, we double crush our grain to make it really fine.


After crushing our grain with a grain mill, we mashed in at 148° F (64.4° C). We mashed for 60 minutes before pulling our grain basket.

mashing in

Mashing in

Pro Tips

Put your spent grain onto a compost pile, this is an easy way to reduce waste while brewing!

putting spent grains in compost

Adding spent grain to compost

Clean your grain basket right after mashing. If you wait too long, the leftover grain will dry up and cake to the basket, making it more difficult to clean.

spraying grain basket to clean it after the mash

Spraying basket after the mash


After a 60 minute mash, we turned the heat on our controller up to 100% to start a 60 minute boil. The hop additions for this recipe are: 

  • 45 minutes - 1 ounce (28.3 grams) Centennial
  • 15 minutes - 1 ounce (28.3 grams) Centennial
  • 5 minutes - 1 ounce (28.3 grams) Centennial
  • Flameout - 2 ounces (56.7 grams) Columbus

all hop additions weighed out

All of the hop additions

Yeast & Fermentation

After our flameout addition, we sanitized a fermentation bucket and chilled our wort down to yeast pitching temp. At 70° F (21.1° C) we pitched two packs of CellarScience Cali dry yeast.

two packs of dry yeast

We fermented this beer at 66° F (18.8° C) for 10 days and then cold crashed it for 48 hours at 34° F (1.1° C). Unfortunately, this yeast did not flocculate as well as we would have liked, so perhaps use San Diego Super Yeast (WLP 090) or a similar yeast for a (potentially) clearer beer.


tasting the finished beerWe’re super happy with how this recipe turned out. The finish was fairly bitter and the overall flavor was very balanced. The best part about this beer isn't just the flavor, it's the price. The total cost of the ingredients for this beer was $63.24. That means every pint of this beer will only cost you $1.58.


If you like this recipe you should check out

West Coast IPA 

All Together IPA 

Juicy NEIPA 

If you have a great recipe you want to share, email us at Please make sure that you've brewed it on a Clawhammer system before sending it to us.






Kyle Brown is the owner of Clawhammer Supply, a small scale distillation and brewing equipment company which he founded in 2009. His passion is teaching people about the many uses of distillation equipment as well as how to make beer at home. When he isn't brewing beer or writing about it, you can find him at his local gym or on the running trail.

Leave a comment

Please note, the design of our website does not allow us to respond directly to blog comments. Please email us directly regarding questions about products. We don't answer questions about recipes, procedures, etc. However, feel free to leave a comment or respond to comments made by others!